• Gambolò (PV) Italy
  • mcr.international07@gmail.com
  • 8,00 - 12,00 // 14,00 - 18,00

R2F

Automatic trimming machine to finish edges applied on straight and curved panels, equipped with WIDIA cutters (possibility to install three kind of cutters).

R2H

Automatic trimming machine to finish edges applied on straight and curved panels, equipped with high frequency motors 0,55 KW. Working by WIDIA cutters (possibility to install three kind of cutters).

K50/3 K100/3

Manual edge banding machine to apply veneer, melamine and PVC pre-glued edges (from 0.4 mm to 3 mm of thickness) to straight and curved panels. Equipped with hot air system provided with a heater electronically controlled, to warm the glue on the edge banding.

Compact 70

Manual edge banding machine with glue tank to apply veneer, melanime and PVC pre-glued edges (from 0,4 mm to 3 mm of thickness) to straight and curved panels.

K100 SCD

Manual edge banding machine with glue tank to apply veneer, melamine and PVC edges (from 0,4 mm to 3 mm of thickness) to straight and curved panels.